從Android模擬器sdcard中導出文件

環境

Eclipse Indigo + Android 2.2

問題

        Android模擬器中使用微信，微信好友向我發送圖片，保存後想導出到電腦磁盤中。

解決

        使用adb pull命令。

[plain]
adb pull <remote> [<local>]  - copy file/dir from device 
 
adb pull 模擬器路徑 [電腦磁盤路徑，可選，不填表示導出到當前目錄] –從設備中拷貝文件或者目錄 

adb pull <remote> [<local>]  - copy file/dir from device

adb pull 模擬器路徑 [電腦磁盤路徑，可選，不填表示導出到當前目錄] –從設備中拷貝文件或者目錄

        比如從/sdcard/tencent/MicroMsg/Camera目錄中導出圖片到D盤，可以使用如下命令：

[plain] view plaincopyprint?adb pull /sdcard/tencent/MicroMsg/Camera D:\ 

adb pull /sdcard/tencent/MicroMsg/Camera D:\
 

操作日志

[plain]
C:\Users\Wentasy>adb -help 
Android Debug Bridge version 1.0.26 
 
 -d                            - directs command to the only connected USB devic 
e 
                                 returns an error if more than one USB device is 
 present. 
 -e                            - directs command to the only running emulator. 
                                 returns an error if more than one emulator is r 
unning. 
 -s <serial number>            - directs command to the USB device or emulator w 
ith 
                                 the given serial number. Overrides ANDROID_SERI 
AL 
                                 environment variable. 
 -p <product name or path>     - simple product name like 'sooner', or 
                                 a relative/absolute path to a product 
                                 out directory like 'out/target/product/sooner'. 
 
                                 If -p is not specified, the ANDROID_PRODUCT_OUT 
 
                                 environment variable is used, which must 
                                 be an absolute path. 
 devices                       - list all connected devices 
 connect <host>[:<port>]       - connect to a device via TCP/IP 
                                 Port 5555 is used by default if no port number 
is specified. 
 disconnect [<host>[:<port>]]  - disconnect from a TCP/IP device. 
                                 Port 5555 is used by default if no port number 
is specified. 
                                 Using this ocmmand with no additional arguments 
 
                                 will disconnect from all connected TCP/IP devic 
es. 
 
device commands: 
  adb push <local> <remote>    - copy file/dir to device 
  adb pull <remote> [<local>]  - copy file/dir from device 
  adb sync [ <directory> ]     - copy host->device only if changed 
                                 (-l means list but don't copy) 
                                 (see 'adb help all') 
  adb shell                    - run remote shell interactively 
  adb shell <command>          - run remote shell command 
  adb emu <command>            - run emulator console command 
  adb logcat [ <filter-spec> ] - View device log 
  adb forward <local> <remote> - forward socket connections 
                                 forward specs are one of: 
                                   tcp:<port> 
                                   localabstract:<unix domain socket name> 
                                   localreserved:<unix domain socket name> 
                                   localfilesystem:<unix domain socket name> 
                                   dev:<character device name> 
                                   jdwp:<process pid> (remote only) 
  adb jdwp                     - list PIDs of processes hosting a JDWP transport 
 
  adb install [-l] [-r] [-s] <file> - push this package file to the device and i 
nstall it 
                                 ('-l' means forward-lock the app) 
                                 ('-r' means reinstall the app, keeping its data 
) 
                                 ('-s' means install on SD card instead of inter 
nal storage) 
  adb uninstall [-k] <package> - remove this app package from the device 
                                 ('-k' means keep the data and cache directories 
) 
  adb bugreport                - return all information from the device 
                                 that should be included in a bug report. 
 
  adb help                     - show this help message 
  adb version                  - show version num 
 
DATAOPTS: 
 (no option)                   - don't touch the data partition 
  -w                           - wipe the data partition 
  -d                           - flash the data partition 
 
scripting: 
  adb wait-for-device          - block until device is online 
  adb start-server             - ensure that there is a server running 
  adb kill-server              - kill the server if it is running 
  adb get-state                - prints: offline | bootloader | device 
  adb get-serialno             - prints: <serial-number> 
  adb status-window            - continuously print device status for a specifie 
d device 
  adb remount                  - remounts the /system partition on the device re 
ad-write 
  adb reboot [bootloader|recovery] - reboots the device, optionally into the boo 
tloader or recovery program 
  adb reboot-bootloader        - reboots the device into the bootloader 
  adb root                     - restarts the adbd daemon with root permissions 
  adb usb                      - restarts the adbd daemon listening on USB 
  adb tcpip <port>             - restarts the adbd daemon listening on TCP on th 
e specified port 
networking: 
  adb ppp <tty> [parameters]   - Run PPP over USB. 
 Note: you should not automatically start a PPP connection. 
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns 
 
adb sync notes: adb sync [ <directory> ] 
  <localdir> can be interpreted in several ways: 
 
  - If <directory> is not specified, both /system and /data partitions will be u 
pdated. 
 
  - If it is "system" or "data", only the corresponding partition 
    is updated. 
 
environmental variables: 
  ADB_TRACE                    - Print debug information. A comma separated list 
 of the following values 
                                 1 or all, adb, sockets, packets, rwx, usb, sync 
, sysdeps, transport, jdwp 
  ANDROID_SERIAL               - The serial number to connect to. -s takes prior 
ity over this if given. 
  ANDROID_LOG_TAGS             - When used with the logcat option, only these de 
bug tags are printed. 
 
C:\Users\Wentasy>cd D: 
D:\ 
 
C:\Users\Wentasy>D: 
 
D:\>adb pull /sdcard/tencent/MicroMsg/Camera D:\ 
pull: building file list... 
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365840005829.jpg -> D:\/mmexport1 
365840005829.jpg 
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365839981899.jpg -> D:\/mmexport1 
365839981899.jpg 
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365839955299.jpg -> D:\/mmexport1 
365839955299.jpg 
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365839940125.jpg -> D:\/mmexport1 
365839940125.jpg 
4 files pulled. 0 files skipped. 
45 KB/s (121750 bytes in 2.595s) 
 
D:\> 
 
D:\>dir 
 Volume in drive D is LENOVO 
 Volume Serial Number is BCCD-80BD 
 
 Directory of D:\ 
 
2013/04/13  16:13            30,560 mmexport1365839940125.jpg 
2013/04/13  16:13            29,325 mmexport1365839955299.jpg 
2013/04/13  16:13            30,643 mmexport1365839981899.jpg 
2013/04/13  16:13            31,222 mmexport1365840005829.jpg 

C:\Users\Wentasy>adb -help
Android Debug Bridge version 1.0.26

 -d                            - directs command to the only connected USB devic
e
                                 returns an error if more than one USB device is
 present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is r
unning.
 -s <serial number>            - directs command to the USB device or emulator w
ith
                                 the given serial number. Overrides ANDROID_SERI
AL
                                 environment variable.
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.

                                 If -p is not specified, the ANDROID_PRODUCT_OUT

                                 environment variable is used, which must
                                 be an absolute path.
 devices                       - list all connected devices
 connect <host>[:<port>]       - connect to a device via TCP/IP
                                 Port 5555 is used by default if no port number
is specified.
 disconnect [<host>[:<port>]]  - disconnect from a TCP/IP device.
                                 Port 5555 is used by default if no port number
is specified.
                                 Using this ocmmand with no additional arguments

                                 will disconnect from all connected TCP/IP devic
es.

device commands:
  adb push <local> <remote>    - copy file/dir to device
  adb pull <remote> [<local>]  - copy file/dir from device
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (-l means list but don't copy)
                                 (see 'adb help all')
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb jdwp                     - list PIDs of processes hosting a JDWP transport

  adb install [-l] [-r] [-s] <file> - push this package file to the device and i
nstall it
                                 ('-l' means forward-lock the app)
                                 ('-r' means reinstall the app, keeping its data
)
                                 ('-s' means install on SD card instead of inter
nal storage)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories
)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb help                     - show this help message
  adb version                  - show version num

DATAOPTS:
 (no option)                   - don't touch the data partition
  -w                           - wipe the data partition
  -d                           - flash the data partition

scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb status-window            - continuously print device status for a specifie
d device
  adb remount                  - remounts the /system partition on the device re
ad-write
  adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
  adb reboot-bootloader        - reboots the device into the bootloader
  adb root                     - restarts the adbd daemon with root permissions
  adb usb                      - restarts the adbd daemon listening on USB
  adb tcpip <port>             - restarts the adbd daemon listening on TCP on th
e specified port
networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, both /system and /data partitions will be u
pdated.

  - If it is "system" or "data", only the corresponding partition
    is updated.

environmental variables:
  ADB_TRACE                    - Print debug information. A comma separated list
 of the following values
                                 1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
  ANDROID_SERIAL               - The serial number to connect to. -s takes prior
ity over this if given.
  ANDROID_LOG_TAGS             - When used with the logcat option, only these de
bug tags are printed.

C:\Users\Wentasy>cd D:
D:\

C:\Users\Wentasy>D:

D:\>adb pull /sdcard/tencent/MicroMsg/Camera D:\
pull: building file list...
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365840005829.jpg -> D:\/mmexport1
365840005829.jpg
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365839981899.jpg -> D:\/mmexport1
365839981899.jpg
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365839955299.jpg -> D:\/mmexport1
365839955299.jpg
pull: /sdcard/tencent/MicroMsg/Camera/mmexport1365839940125.jpg -> D:\/mmexport1
365839940125.jpg
4 files pulled. 0 files skipped.
45 KB/s (121750 bytes in 2.595s)

D:\>

D:\>dir
 Volume in drive D is LENOVO
 Volume Serial Number is BCCD-80BD

 Directory of D:\

2013/04/13  16:13            30,560 mmexport1365839940125.jpg
2013/04/13  16:13            29,325 mmexport1365839955299.jpg
2013/04/13  16:13            30,643 mmexport1365839981899.jpg
2013/04/13  16:13            31,222 mmexport1365840005829.jpg